SteamOS 0.4.4 beta adds a Steam Frame presence sensor setting for glasses spacers
Valve has given Steam Frame owners a say in how readily the headset decides nobody is wearing it. SteamOS 0.4.4, published to the Frame beta channel on October 5 at 23:14 UTC, adds a Presence Sensor Sensitivity setting whose new high sensitivity option, in Valve's words, "keeps displays on under a wider range of conditions, such as when using glasses spacers".

Valve puts the new sensitivity control in the headset's VR settings, under Startup / Shutdown. Image: Valve
The control lives inside the headset under VR Settings, then Startup / Shutdown, then Presence Sensor. Valve describes the whole thing in one line:
Added user setting to control Presence Sensor Sensitivity (VR Settings -> Startup / Shutdown -> Presence Sensor). New "high sensitivity" option keeps displays on under a wider range of conditions, such as when using glasses spacers.
High sensitivity is an option rather than the new default, so a Frame on the beta channel behaves as before until an owner goes and changes it. The only other new item Valve lists in 0.4.4 is improved tooltip sort ordering.
Valve frames the build itself as provisional, calling it an update "for the Steam Frame Beta channel" that "includes new features that are still being tested".
The presence sensor decides whether the displays stay lit
Valve gives the sensor a job in the headset's startup and shutdown behaviour, which is why the setting sits there rather than under display options. When the sensor reads the headset as off a face, the displays stop.
A glasses spacer increases the distance between the optics and the wearer, and that is the case Valve names in the release note. Valve does not say the sensor was reading that distance wrongly before, does not name a spacer, and gives no threshold, no angle and no figure of any kind for what high sensitivity changes.
Valve's own description cuts both ways. A sensor that keeps the displays on "under a wider range of conditions" is also a sensor that keeps them on in conditions where the headset is sitting on a desk, and the release note says nothing about what the option costs in power or in wear.
Valve has touched the Frame proximity model three times in three weeks
The two earlier passes were silent ones. SteamOS 0.4.1, published on September 26, listed "Improved proximity sensor detection model." SteamOS 0.4.2, three days later, listed "Improved user proximity detection" and nothing further.
Neither gave an owner anything to adjust. 0.4.4 is the first of the three to put the decision in the headset's own settings, and it arrives after the 0.4.1 release that changed how the Frame decides a headset is on a face.
None of this has left the beta channel
0.4.4 is opt-in through Settings, System, System Update Channel on the headset, and Valve gives no date for it reaching the stable channel. Frames on stable are still on the earlier build.
It is also the fourth 0.4 release in 10 days: 0.4.1 on September 26, 0.4.2 on September 29, 0.4.3 on October 1 with its claim of up to 12% more battery life, and now 0.4.4. Valve is shipping to Frame owners roughly twice a week.
What the release note does not carry is any account of what the sensor was set to until now. The sensitivity is suddenly a user setting with two positions, and only one of them has a name.