JSAUX bietet kostenlosen Ersatz für Steam Machine Pixel Matrix nach einem Speicherverschleiß-Fehler an

JSAUX bietet kostenlosen Ersatz für Steam Machine Pixel Matrix nach einem Speicherverschleiß-Fehler an

JSAUX is offering free replacement Pixel Matrix faceplates for Steam Machine owners after acknowledging a flaw that causes excessive writes to the accessory's storage. Its latest software, V1.2.1, also addresses unwanted performance overlays and incorrect frame-rate readings.

The affected accessory is the colour display from JSAUX's two Steam Machine faceplates. It replaces Steam Machine's magnetic front panel with a 7-inch RGB matrix for system statistics, clocks and pixel art, using USB-C for power and data.

In its October 23 announcement, JSAUX explains that the original Clock and Performance screens saved every one-second redraw to storage, accelerating wear. Uploaded images, including animations, are written once; displaying them afterwards does not cause the same repeated writes.

JSAUX Pixel Matrix Faceplate fitted to a Steam Machine showing FPS and GPU, CPU and RAM readings

The Pixel Matrix Faceplate displays system readings on a colour RGB grid. Image: JSAUX

Owners can request a replacement without returning their current panel

JSAUX asks owners to update first. Anyone still concerned afterwards can email [email protected] with the subject Pixel Matrix Replacement, their order number and shipping address. The company will confirm the details and begin sending replacements in early November, in request order. Owners can keep their existing faceplate.

JSAUX promotional illustration of MatrixLink controls beside a Steam Machine with its Pixel Matrix Faceplate

JSAUX’s promotional illustration shows the MatrixLink controls for the Pixel Matrix panel. Image: JSAUX

The replacement hardware holds the clock and performance layouts on the panel and receives only changing numbers from Steam Machine, so those updates no longer write to storage. It also supports firmware updates over USB-C and adds USB-C current limiting. JSAUX says November shipments and outstanding orders will use this revision.

This replaces an earlier proposal to send owners a programming tool that required opening the faceplate. JSAUX has also extended the Pixel Matrix warranty from 18 to 24 months, with free replacements for display issues during that period.

JSAUX Pixel Matrix Faceplate displaying a countdown with its USB cable and rear connection shown

The Pixel Matrix Faceplate receives power and data through a USB connection. Image: JSAUX

The latest app update fixes overlays as well as incorrect FPS readings

The initial V1.2 software reduces unnecessary redraws. The clock's colon stays lit and its progress bar advances once a minute. An optional Do Not Disturb mode, disabled by default, updates CPU, GPU and RAM figures only when they change by more than six percentage points; FPS continues updating.

In an October 27 follow-up, JSAUX says V1.2.1 fixes stuck FPS values and incorrect readings of 60, while stopping unwanted GPU, CPU and VKD3D overlays from stacking in non-Steam games. The panel retains its FPS feed. Brightness can now be increased with a controller, and the display blanks before shutdown, reboot or a service stop while retaining its settings.

The current package is linked from JSAUX's official installation guide. Pixel Matrix setup uses Decky Loader and the JSAUX PIXEL package in SteamOS Desktop Mode, then makes the controls available through a desktop shortcut and the Decky plugin in Gaming Mode. The E-Ink panel has a separate installer.

The software update and replacement programme address different parts of the problem: V1.2.1 updates the app and plugin, while the redesigned panel changes how clock and performance data reach its storage.

Kommentar schreiben

Ihre E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert